Best decorative vents

Here we will show you decorative vents. You can see all the products from the review of our decorative vents.
When looking for the new decorative vents, we are helping you find the right product in our review experience.
The results of our review tests are based on the many decorative vents and tried to choose with this test.
We have created a list of Best decorative vents of 2017.

Best decorative vents

SaleBestseller No. 1
Decor Grates SPH410-NKL 4-Inch by 10-Inch Scroll Floor Register, Brushed Nickel
  • Rust proof damper body with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 2
Decorative Vent Cover for a 12x8 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Cosmo Design 14x10 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8)
  • Choose size based on your opening. There is a 1/4" lip on the back of the grille, it is not completely flat. (see pic 2)
  • Grille will come with predrilled countersunk screw holes and screws
Bestseller No. 3
Ekena Millwork GVRO24TDK 24-Inch W x 24-Inch H x 1 1/2-Inch P Round Gable Vent with Keystones, Decorative
  • Decorative purposes only, does not provide air flow
  • Solid urethane for maximum durability and detail
  • Lightweight for quick and easy installation
Bestseller No. 4
Decorative Vent Cover for a 12x6 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Ribbon Design. 14x8 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is flat, nothing goes in your opening
  • Grille is unfinished polyurethane material and will need to be painted by you
SaleBestseller No. 5
Ekena Millwork GVOC22X22D 22-Inch W x 22-Inch H x 2 1/8-Inch P Octagon Gable Vent Louver, Decorative
  • Decorative purposes only, does not provide air flow
  • Solid urethane for maximum durability and detail
  • Lightweight for quick and easy installation
Bestseller No. 6
Decorative Vent Cover for a 10x10 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Caspian Design. 12x12 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is not flat, there is a 1/4" lip inset (as shown in second photo)
  • Grille is unfinished polyurethane material and will need to be painted by you
SaleBestseller No. 7
Ekena Millwork GVRO18D 18-Inch W x 18-Inch H x 1 3/4-Inch P Round Gable Vent Louver, Decorative
  • Decorative purposes only, does not provide air flow
  • Solid urethane for maximum durability and detail
  • Lightweight for quick and easy installation
Bestseller No. 8
Decor Grates S610R-WH 6-Inch by 10-Inch Painted Return Air, White
  • Inside Dimensions: 6" x 10" & Outside Dimensions: 7 1/2" x 11 1/2"
  • Fits Duct Opening : 6" x 10"
  • Enhance any room's décor
Bestseller No. 9
Decorative Vent Cover for a 10x8 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Iron Ring Design. 12x10 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is flat, nothing goes in your opening
  • Grille is unfinished polyurethane material and will need to be painted by you
SaleBestseller No. 10
Decor Grates ST410 Scroll Floor Register, Textured Black, 4-Inch by 10-Inch
  • Rust proof damper body with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation

Here we are gonna show you decorative vents. You can see all the products from our decorative vents reviews.

  • First of all, we are showing you table of the best decorative vents for your better orientation to buy decorative vents.
  • Below this table is a detailed list of all decorative vents by our review sorted by best seller rank.
  • Enjoy a lot of fun by selecting your decorative vents.

TOP 30 decorative vents

SaleBestseller No. 1Bestseller No. 1
Decor Grates SPH410-NKL 4-Inch by 10-Inch Scroll Floor Register, Brushed Nickel
  • Rust proof damper body with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 2Bestseller No. 2
Accord Ventilation AMFRRBB214 Wicker Design Floor Register, Oil Rubbed Bronze, 2" x 14"
  • Decorative wicker design
  • Dark Oil Rubbed Bronze finish
  • Rustproof multi-louvered damper
Bestseller No. 3Bestseller No. 3
Decorative Vent Cover for a 12x8 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Cosmo Design 14x10 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8)
  • Choose size based on your opening. There is a 1/4" lip on the back of the grille, it is not completely flat. (see pic 2)
  • Grille will come with predrilled countersunk screw holes and screws
SaleBestseller No. 4Bestseller No. 4
SABA Home Decor 10" x 6" Duct Opening (12" x 8" Overall) FiberGlass Decorative Grille Vent Return Register Easy Air Flow Mirror Finish Cover For Walls and Ceilings (not for Floor use) - Waves
  • DECORATIVE, BEAUTIFUL AND HIGH QUALITY FIBERGLASS MIRROR MATERIAL which is moisture and heat resistant suitable to cover air vents, ducts or openings all around your house, apartment or office space
  • PERFECT FIT FOR WALLS AND CEILINGS, not for floor use. Created to replace old louvered grilles and make your room look new again
  • EASY AND FAST TO INSTALL, requires only silicon to attach to the wall or ceiling No screws or any other hard work is required. On top of that it is maintenance free after installation as no corrosion, rust or mold will be formed on this material
Bestseller No. 5Bestseller No. 5
Decor Grates S610R-WH 6-Inch by 10-Inch Painted Return Air, White
  • Inside Dimensions: 6" x 10" & Outside Dimensions: 7 1/2" x 11 1/2"
  • Fits Duct Opening : 6" x 10"
  • Enhance any room's décor
SaleBestseller No. 6Bestseller No. 6
Ekena Millwork GVRO12D 12-Inch W x 12-Inch H x 1 3/8-Inch P Round Gable Vent Louver, Decorative
  • Decorative purposes only, does not provide air flow
  • Solid urethane for maximum durability and detail
  • Lightweight for quick and easy installation
Bestseller No. 7Bestseller No. 7
Decorative Vent Cover for a 14x6 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Ribbon Design. 16x8 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is flat, nothing goes in your opening
  • Grille is unfinished polyurethane material and will need to be painted by you
SaleBestseller No. 8Bestseller No. 8
Decor Grates ST410 Scroll Floor Register, Textured Black, 4-Inch by 10-Inch
  • Rust proof damper body with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 9Bestseller No. 9
Decorative Vent Cover for a 12x6 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Ribbon Design. 14x8 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is flat, nothing goes in your opening
  • Grille is unfinished polyurethane material and will need to be painted by you
Bestseller No. 10Bestseller No. 10
Decorative Vent Cover for a 8x6 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Cosmo Design 10x8 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8)
  • Choose size based on your opening. There is a 1/4" lip on the back of the grille, it is not completely flat. (see pic 2)
  • Grille will come with predrilled countersunk screw holes and screws
Bestseller No. 11Bestseller No. 11
Ekena Millwork GVRO24TDK 24-Inch W x 24-Inch H x 1 1/2-Inch P Round Gable Vent with Keystones, Decorative
  • Decorative purposes only, does not provide air flow
  • Solid urethane for maximum durability and detail
  • Lightweight for quick and easy installation
SaleBestseller No. 12Bestseller No. 12
Decor Grates AJH410-RB Oriental Floor Register, Rubbed Bronze, 4-Inch by 10-Inch
  • Rust proof damper body with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 13Bestseller No. 13
Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit over a 10"x16" duct or opening. Total size of vent is 12"x18"x3/8", for wall and ceiling grilles (not for floor use).
  • Incredible three dimensional detail of grille (see expanded view), not just hole punched sheet metal. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Much superior to the rough and grainy looking surfaces of cast iron or cast aluminum grilles.
  • Maintenance free, you should not have to re-finish, remove rust, corrosion or mold for life of our exterior grade urethane resin grilles. Can be used in damp or wet locations, like exteriors, bathrooms, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Frequently used to replace unattractive exhaust fan covers in bathrooms.
  • Easy installation, Pre-drilled screw holes and all necessary hardware provided. Our grilles are flat on the back, with no protrusion that needs to fit into the duct-work. Just place over duct, level and screw in. See attached "spec sheet" with drawing, measurements, Material Technical Data on resin, plus Free Air Flow and other information.
SaleBestseller No. 14Bestseller No. 14
Ekena Millwork GVOC22X22D 22-Inch W x 22-Inch H x 2 1/8-Inch P Octagon Gable Vent Louver, Decorative
  • Decorative purposes only, does not provide air flow
  • Solid urethane for maximum durability and detail
  • Lightweight for quick and easy installation
Bestseller No. 15Bestseller No. 15
NEVERLAND 2 x ABS Car Universal Decorative Intake Scoop Turbo Bonnet Vent Cover Hood Auto NEW
  • Material: High quality ABS plastic
  • Amazing with modern design style.
  • Make your car cool and distinctive.
Bestseller No. 16Bestseller No. 16
Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit over a 14"x20" duct or opening. Total size of vent is 16”x22"x3/8", for wall and ceiling grilles (not for floor use).
  • Incredible three dimensional detail of grille (see expanded view), not just hole punched sheet metal. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Much superior to the rough and grainy looking surfaces of cast iron or cast aluminum grilles.
  • Maintenance free, you should not have to re-finish, remove rust, corrosion or mold for life of our exterior grade urethane resin grilles. Can be used in damp or wet locations, like exteriors, bathrooms, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Frequently used to replace unattractive exhaust fan covers in bathrooms.
  • Easy installation, Pre-drilled screw holes and all necessary hardware provided. Our grilles are flat on the back, with no protrusion that needs to fit into the duct-work. Just place over duct, level and screw in. See attached "spec sheet" with drawing, measurements, Material Technical Data on resin, plus Free Air Flow and other information.
SaleBestseller No. 17Bestseller No. 17
Decor Grates SPH408-A 4-Inch by 8-Inch Scroll Floor Register, Antique Brass
  • Rust proof damper body with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 18Bestseller No. 18
Decorative Vent Cover for a 10x8 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Iron Ring Design. 12x10 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is flat, nothing goes in your opening
  • Grille is unfinished polyurethane material and will need to be painted by you
Bestseller No. 19Bestseller No. 19
Decor Grates S610W-WH 6-Inch by 10-Inch Painted Wall Register, White
  • Rust proof damper box with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 20Bestseller No. 20
Lapdesk - Portable, Adjustable Tray, Stand, Bed Table with Decorative Vent - for Laptop Computers, Tablets and Books
  • WHY LIMIT YOURSELF: Sometimes, we just want to want to use our laptop, tablet, or book where we are most comfortable, stimulated, or inspired, like on the living room couch, the old reclining chair in front of the TV, the porch bench, the poolside lounge, or even my personal favorite, bed; the Lapdesk is the perfect accessory for these occasions
  • BE COMFORTABLE: No more jerry rigging a "pseudo-lapdesk" with a pillow or folded up blanket; the Lapdesk is designed for using your laptop, tablet, or book in the most scenic, comfortable, rejuvenating settings; there is a cup groove to keep your drink from sliding around; there is a side drawer to store accessories; it is 21.6 inches (55 centimeters) wide; its height is adjustable from its minimum height of 8 inches (20 centimeters) to its maximum height of 11 inches (28 centimeters)
  • DECORATIVE VENT: Using makeshift items as "pseudo-lapdesks" can sometimes stifle airflow causing your laptop to get overheated, not good; use the real Lapdesk instead; it has a beautifully carved vent to maintain proper airflow and keep your laptop from overheating
Bestseller No. 21Bestseller No. 21
Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit over a 14"x14" duct or opening. Total size of vent is 16”x16"x3/8", for wall and ceiling grilles (not for floor use).
  • Decorative Grille, historic reproduction of possibly the best grille ever made in USA, Circa 1870's
  • Use to replace old louvered grilles with decorative supply or return grill, for wall & ceiling
  • Incredible three dimensional detail on front surface of grille, not just hole punched sheet metal
Bestseller No. 22Bestseller No. 22
Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit over a 6"x30" duct or opening. Total size of vent is 8"x32"x3/8", for wall and ceiling grilles (not for floor use).
  • Incredible three dimensional detail of grille (see expanded view), not just hole punched sheet metal. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Much superior to the rough and grainy looking surfaces of cast iron or cast aluminum grilles.
  • Maintenance free, you should not have to re-finish, remove rust, corrosion or mold for life of our exterior grade urethane resin grilles. Can be used in damp or wet locations, like exteriors, bathrooms, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Frequently used to replace unattractive exhaust fan covers in bathrooms.
  • Easy installation, Pre-drilled screw holes and all necessary hardware provided. Our grilles are flat on the back, with no protrusion that needs to fit into the duct-work. Just place over duct, level and screw in. See attached "spec sheet" with drawing, measurements, Material Technical Data on resin, plus Free Air Flow and other information.
Bestseller No. 23Bestseller No. 23
Decorative Vent Cover for a 10x10 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Caspian Design. 12x12 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is not flat, there is a 1/4" lip inset (as shown in second photo)
  • Grille is unfinished polyurethane material and will need to be painted by you
Bestseller No. 24Bestseller No. 24
Decor Grates LA408-NKL 4-Inch by 8-Inch Aluminum Floor Register, Nickel
  • Rust proof damper box with easy air flow control
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 25Bestseller No. 25
4" X 10" Nickel Victorian Floor Register Grille - Modern Contempo Decorative Grate - HVAC Vent Duct Cover - Brush Nickel
  • 4" X 10" Is The Size For The Duct Opening (floor/vent hole) Measurement Only, Actual Front End Outer Dimensions Are 5.5" X 11.5" - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
  • Solid Rigid Steel Body For Durability and Reliability
  • Premium Plated Finish and Modern Contempo Design Forming a Luxurious Piece
Bestseller No. 26Bestseller No. 26
Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit over a 10"x10" duct or opening. Total size of vent is 12"x12"x3/8", for wall and ceiling grilles (not for floor use).
  • Incredible three dimensional detail of grille (see expanded view), not just hole punched sheet metal. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Much superior to the rough and grainy looking surfaces of cast iron or cast aluminum grilles.
  • Maintenance free, you should not have to re-finish, remove rust, corrosion or mold for life of our exterior grade urethane resin grilles. Can be used in damp or wet locations, like exteriors, bathrooms, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Frequently used to replace unattractive exhaust fan covers in bathrooms.
  • Easy installation, Pre-drilled screw holes and all necessary hardware provided. Our grilles are flat on the back, with no protrusion that needs to fit into the duct-work. Just place over duct, level and screw in. See attached "spec sheet" with drawing, measurements, Material Technical Data on resin, plus Free Air Flow and other information.
Bestseller No. 27Bestseller No. 27
Decorative Vent Cover for a 10x8 Opening. Resin Paint Grade Grille Can Be Used As Return, Supply, Foundation Vent, Register. Ribbon Design. 12x10 Overall Size
  • Important: Main picture shown is a 12x6 grille (overall size approx. 14x8).
  • Choose size based on your opening. The back of the grille is flat, nothing goes in your opening
  • Grille is unfinished polyurethane material and will need to be painted by you
Bestseller No. 28Bestseller No. 28
Decorative Grille, Vent Cover, or Return Register. Made of Urethane Resin to fit over a 6"x8" duct or opening. Total size of vent is 8"x10"x3/8", for wall and ceiling grilles (not for floor use).
  • Incredible three dimensional detail of grille (see expanded view), not just hole punched sheet metal. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Much superior to the rough and grainy looking surfaces of cast iron or cast aluminum grilles.
  • Maintenance free, you should not have to re-finish, remove rust, corrosion or mold for life of our exterior grade urethane resin grilles. Can be used in damp or wet locations, like exteriors, bathrooms, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room. Frequently used to replace unattractive exhaust fan covers in bathrooms.
  • Easy installation, Pre-drilled screw holes and all necessary hardware provided. Our grilles are flat on the back, with no protrusion that needs to fit into the duct-work. Just place over duct, level and screw in. See attached "spec sheet" with drawing, measurements, Material Technical Data on resin, plus Free Air Flow and other information.
Bestseller No. 29Bestseller No. 29
Decor Grates AJL612W-NKL Oriental Wall Register, 6-Inch by 12-Inch, Nickel
  • Oriental steel plated nickel wall register
  • Easy to install
  • Crafted for long trouble free operation
Bestseller No. 30Bestseller No. 30
Decorative Vent Cover, Grille, made of Urethane Resin in Louis XIV, French style fits over a 10”x 30”, Total size, 12” by 32”, for wall & ceiling installation only. (not for floors) (Rubbed Bronze)
  • Incredible three dimensional detail of grille (see expanded view), not just hole punched sheet metal. Our urethane resin cast grilles are equal in surface quality to Investment casting or lost wax casting quality at a fraction of the cost. Much superior to the rough looking surfaces of cast iron or cast aluminum grilles.
  • Maintenance free, you should not have to re-finish, remove rust, corrosion or mold for life of our exterior grade urethane resin grilles. Can be used in damp or wet locations, like exteriors, bathrooms, kitchens and indoor swimming pools or the other rooms on the same HVAC system as the pool room.
  • Easy installation, Predrilled screw-holes and all necessary hardware provided. Our grilles are flat on the back, with no protrusion that needs to fit into the duct-work. Just place over duct, level and screw in.

With the help of these decorative vents reviews we can choose best winner!

Leave a Reply

Your email address will not be published. Required fields are marked *